Results 1 to 10 of 16

Thread: What about consistency between platforms ?

Hybrid View

  1. #1
    Join Date
    Jan 2008
    Location
    Colorado, U.S.A.
    Posts
    145

    Default What about consistency between platforms ?

    When transferring a mix between two DAW applications (platforms), on the same computer, same sample rate, same bit depth, shouldn't it sound the same on either platform ?

    For example, on my computer I'll do single track editing in WaveLab, then transfer the tracks to Sonar Producer for multi-track editing and mix down to stereo. Then it's back to WaveLab with the stereo mixes for any audio analysis and/or finishing touches (pseudo mastering).

    The stereo mixes sound slightly different on Sonar and Wavelab. Slight differences, but differences nonetheless...

    What I hear are 1 to 2.5 dB variations in certain frequencies across the spectrum, and a very slight change in soundstage depth.
    Last edited by ticker; 06-15-2010 at 07:26 PM. Reason: spelling error

  2. #2
    Join Date
    Sep 2001
    Location
    Fresno, CA
    Posts
    237

    Default

    What's the Pan Law settings on the different DAW's?
    Henry Grimmius
    Fresno, CA

  3. #3
    Join Date
    Jan 2008
    Location
    Colorado, U.S.A.
    Posts
    145

    Default

    Quote Originally Posted by Henry Grimmius View Post
    What's the Pan Law settings on the different DAW's?
    Thanks for getting back to me, Henry.

    Both pan law settings are default. For Sonar the default is 0dB. WaveLab only uses "pan mode" settings if you are using pan envelopes, which, for simple playback, I am not. So if there is otherwise a default pan law setting for playback in WaveLab, I don't know what it would be.

  4. #4
    Join Date
    Sep 2001
    Location
    Fresno, CA
    Posts
    237

    Default

    I don't know either of the programs, so I'm of no help in that regard. I wish manufacturers had a standard on how to describe it but they don't. On my DM2000 console, I had to read the section in the manual a few times for clarity. Then set my console and never looked back. I also did listening in mono and changed the setting to hear what was changing.
    Henry Grimmius
    Fresno, CA

  5. #5
    Join Date
    Jan 2008
    Location
    Colorado, U.S.A.
    Posts
    145

    Default

    I may have to spend some time talking with the Steinberg (Wavelab) tech support people to get a better understanding of the pan laws specific to their product.

    I did find something that may have been a major factor for the differences I was hearing between those two applications. It turns out my driver mode setting for Sonar was set to ASIO, and for Wavelab was set to MME. Once I set both of them identically to ASIO, most of the audible differences in same-file playback seemed to go away.

    Are you familiar with the different driver modes and their qualitative effects on playback ?

  6. #6
    Join Date
    Aug 2001
    Location
    Fort Wayne, IN, USA
    Posts
    27,246

    Default

    Oh man. I've never even considered that. Another thing to check for when comparing DAWs.

    Quote Originally Posted by ticker View Post
    I may have to spend some time talking with the Steinberg (Wavelab) tech support people to get a better understanding of the pan laws specific to their product.

    I did find something that may have been a major factor for the differences I was hearing between those two applications. It turns out my driver mode setting for Sonar was set to ASIO, and for Wavelab was set to MME. Once I set both of them identically to ASIO, most of the audible differences in same-file playback seemed to go away.

    Are you familiar with the different driver modes and their qualitative effects on playback ?
    Lynn Fuston
    3D Audio

    Making beautiful music SEEM easy since 1979.

  7. #7
    Join Date
    Nov 2004
    Location
    Europe
    Posts
    2,565

    Default

    Quote Originally Posted by ticker View Post
    I did find something that may have been a major factor for the differences I was hearing between those two applications. It turns out my driver mode setting for Sonar was set to ASIO, and for Wavelab was set to MME. Once I set both of them identically to ASIO, most of the audible differences in same-file playback seemed to go away.

    Are you familiar with the different driver modes and their qualitative effects on playback ?
    Did you try a null test? Wavelab ASIO vs. Wavelab MME?

    Best regards
    Andreas Lassak
    SoundDesign Studio

    It's maddening: As soon as I make it right - it suddenly works!

  8. #8
    Join Date
    Nov 2004
    Location
    Europe
    Posts
    2,565

    Default

    Quote Originally Posted by ticker View Post
    I may have to spend some time talking with the Steinberg (Wavelab) tech support people to get a better understanding of the pan laws specific to their product.
    Actually there are four pan modes in Wavelab (V.5 and V.6):

    1. Channel damp (0dB / mute)
    This mode will not compensate for power loss at all. If a signal is panned hard left or right, the
    the sum of the channels will drop by 3dB.

    2. Constant power (+3dB / mute)

    This is the default mode. Regardless of the pan position, the power of the sum of the channels
    remain constant.

    3. Channel boost (+4.5dB / mute)
    If this mode is selected and a signal is panned hard left or right, the power of the sum of the channels
    will actually be higher than with a signal panned center.

    4. Channel boost (+6dB / mute)
    This is the same as the previous option, but with even greater power boost.

    Best regards
    Last edited by Andreas Lassak; 06-20-2010 at 01:36 AM.
    Andreas Lassak
    SoundDesign Studio

    It's maddening: As soon as I make it right - it suddenly works!

Similar Threads

  1. Interesting list of audio software/platforms
    By 3daudioinc in forum The Old Yellow Board
    Replies: 1
    Last Post: 09-22-2008, 07:16 PM
  2. Elux 251 / Mic to Mic Consistency?
    By Adrian in forum Microphones and Preamps
    Replies: 1
    Last Post: 02-10-2006, 10:45 PM
  3. protability of files between PT and other platforms
    By Gary Rimmington in forum The Old Yellow Board
    Replies: 6
    Last Post: 07-16-2004, 07:57 AM
  4. Hardwood floors, drum platforms, and Jewish people...
    By john parry in forum The Old Yellow Board
    Replies: 8
    Last Post: 03-17-2004, 11:11 PM
  5. Here's the list of included Platforms
    By 3daudioinc in forum Awesome DAW-SUM Comparison
    Replies: 14
    Last Post: 04-10-2003, 07:37 PM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •